+86 152 6187 8920Get Quote

Private Label Nitrile Gloves: What a Factory Can Customize

Written by

in

Most private label briefs ask for the two things easiest to change — box artwork and glove colour — and leave out the one that decides who is legally on the hook when a complaint lands. Put your own brand on a box of examination gloves in Europe and you may have just made yourself the legal manufacturer of a medical device. That is not a detail for the end of the project; it sets what your quality file must contain before the first carton ships.

So, from the production side: what a glove line can and cannot customise, in the order the decisions bind.

What can genuinely be customised, and what each change costs

What you can change What it takes What it costs in time or money
Box face print Your artwork to our die line, with bleed, colour count and a signed proof Plate cost per colour and a print minimum per box size — usually the binding minimum on the order
Inner box and case count A packing spec change; ours runs 100 pieces per box, 10 boxes per case Low cost, high reconciliation risk if counts differ by size — fix it in writing
Carton shipping marks Your mark artwork, carton panel layout and stencil or label method Cheap, and the most useful thing to get right for your warehouse
Glove colour Compounding change, a trial run and shade approval against a physical reference The real cost is schedule, not pigment
Gram weight Dipping parameter change within the range the line holds The price moves with it: the quote is built on gram weight
Size split Former allocation across the run Free to ask, but an unbalanced split lengthens the run
Cuff and texture Former and finish selection within what the line runs Ask against the specific model, in writing, not in general

Private label buyers ask about scale. Our Taishan glove manufacturing site occupies approximately 74,000 m² of land, with a Phase I factory area of approximately 27,000 m².

Two things we will not customise by correspondence. Powder is not an option for the US: powdered patient examination and surgeon’s gloves have been banned there since 18 January 2017 under a rule applying regardless of glove material, so anyone offering a powdered US variant in 2026 is working from a pre-2017 sheet. And surface treatment — chlorinated or polymer-coated — is a model-specific answer, not a range-wide claim.

We make no latex or surgical gloves, which is worth knowing at the brief, not at the sample.

The clause that decides who the manufacturer is

This is the part worth the whole article, and the part most private label offers skip.

Under Article 16 of Regulation (EU) 2017/745, a distributor or importer that makes a device available under its own name, registered trade name or registered trade mark assumes the obligations of the manufacturer — unless there is an agreement with the manufacturer under which the manufacturer is identified as such on the label. Relabelling and repackaging are treated separately: Article 16(2) says they do not in themselves shift manufacturer obligations, but the party doing them must meet Article 16(3) and hold a notified body certificate under Article 16(4), with MDCG 2021-26 giving the detail.

That gives three routes for a European private label programme, and you pick one before artwork:

  1. Your brand, your obligations. Your name alone on the box, and you take on the manufacturer’s duties — technical documentation, conformity assessment, post-market surveillance, vigilance.
  2. Your brand, the manufacturer’s name on the label, and an agreement. The manufacturer is identified as such on the label and carries those duties under a written agreement with you. This is the route most glove programmes want.
  3. Relabelling or repackaging, with its own Article 16(3) requirements and a notified body certificate under Article 16(4).

Settle that at the brief and write it into the agreement, because the answer changes the artwork, the document pack and who holds the technical file. A supplier quoting a private label price without raising it has left the biggest item off the quotation.

On the US side, registration and listing are separate from approval — 21 CFR 807.39 says establishment registration and device listing do not denote FDA approval — and whose name appears in the listing for an own-brand programme is settled in writing at the brief, not assumed. We provide the registration and device listing information for the US market with the quotation.

What has to be on the box whoever owns the brand

Private label artwork is not a free canvas. For the EU market the symbols and information supplied with the device follow EN ISO 15223-1 and EN ISO 20417, and our EU Declaration of Conformity for nitrile examination gloves references those alongside EN 455-1 to -4 and the EN ISO 14971 and EN ISO 10993 series. Leave room for:

  • the device symbols and information those standards require, in the language set of every market on the pack;
  • the UDI carrier, with whose UDI it is settled by the Article 16 route you chose;
  • the lot and expiry panel, in a position our printing can hit;
  • size, count, gram weight and the standards the item is tested to;
  • the latex statement: where a glove is not made with natural rubber latex, say exactly that rather than “latex free”, which US guidance advises against because absence of the allergens cannot be reliably assured.

Send the die line to your designer before they start: re-laying artwork to fit a panel is the most common two-week delay on a first private label order.

Colour: how shade control actually works

Colour is a compounding change with a trial run and an approval step, and the approval step is where programmes come unstuck: pigment lots drift, so a shade signed off on a photograph is not signed off. Agree these in writing before the main run:

  1. The physical reference, and who holds the retained counter-sample.
  2. The tolerance, and the lighting condition for the comparison.
  3. Whether approval is per order or once for the programme.
  4. What happens to a batch outside tolerance, and who carries it.

Get those four down and shade drift is a measurable deviation. Leave them out and the party without a retained reference loses the argument.

Gram weight, and the two numbers that must both appear

The quote is built on gram weight; incoming inspection in most warehouses runs in mil. Those are different measurements of the same glove, and a programme priced on one and accepted on the other generates a dispute on the first container.

Ask for both, and where thickness was measured — fingertip, palm and cuff are three different figures. Our published 3.5 g specification is force at break ≥6 N, elongation 400%, length ≥240 mm, and ±0.3 g on the M size; ask any supplier for the report on your lot rather than a range-wide sheet.

Under EN 455-2 the median force at break is banded by material — rubber examination gloves such as nitrile ≥6.0 N, surgical ≥9.0 N, thermoplastic examination gloves such as vinyl ≥3.6 N, as the median of thirteen — and an amendment revised that table to clear up misreadings, so state which revision your report cites.

The six steps, and where the clock actually runs

  1. Spec brief — model, gram weight, colour, sizes and split, destination markets, Article 16 route.
  2. Sample — a stock sample settles feel and box quality; a development sample answers “can you run my spec” and carries a trial run.
  3. Artwork — die line out, proof back, signed. This step owns most of the calendar.
  4. Shade and pre-production approval — reference signed, counter-sample retained.
  5. Production and out-of-line inspection — at the EN 455-1 figure of AQL 1.5.
  6. Shipment — documents per market, lot codes keyed to your order.

Our MOQ is flexible. Tell us the quantity you need and we will quote accordingly. Lead time is confirmed with each quotation. Payment terms are confirmed with each quotation. On a private label order the floor is the print minimum on the box, which is why steps 1 and 3 decide your economics more than step 5.

Inspection and the acceptance figure

Sampling is the uncontroversial half: pull against ISO 2859-1, general inspection level II, lot defined as the production batch.

The acceptance figure has to name a market. For the US the figure for examination gloves is AQL 2.5 under 21 CFR 800.20; the EU applies AQL 1.5 under EN 455-1. Our out-of-line inspection runs at that EN 455-1 figure; agree in writing whether your nominated inspection company or your own staff will inspect on site. On a private label run add the print defects to the classes explicitly — colour out of tolerance against the retained reference, print misregistration, wrong language version, lot panel illegible, shipping mark wrong — because a glove passing on barrier and failing on print is still a rejected shipment.

Case, cube and commercial terms

Commercial term What to fix in the purchase order
Pack hierarchy Glove → box → case → pallet. Ours is 100 pieces per box, 10 boxes per case; confirm the piece count per box for every size you order
Count reconciliation Reconcile by piece, not by case: XL is commonly packed at a lower count per box than M at the same boxes per case, the most common invoice dispute in gloves
Loadability As planning figures only: 20ft roughly 26–28 m³, 40ft 55–58 m³, 40HQ 65–68 m³ — gloves cube out long before they weigh out
Shipping marks Carton panel layout, mark artwork, case count and lot code position — agreed before the first run
Incoterm and port of loading An EXW number, a FOB number and a DDP number are three different prices; compare only like with like, and check your own duty line first. Ask your supplier to state the Incoterm and named port of loading in the quotation
HS line Medical gloves of vulcanised rubber sit at 4015.12. Confirm the national subheading against the tariff of the country of import before comparing our number with a delivered quote
Price and payment Indicative USD per case against the current NBR index, with a stated validity window and payment terms named in the order — an open-ended price in gloves usually means room in the gram weight

Change control on a branded programme

Once your name is on the box, a change we treat as routine becomes a change to your product. Ask every supplier for a written change notification policy covering compound, pigment, surface treatment, box print and source site. If your quality system needs an approval gate before a changed product ships, raise it at the purchase order stage so it sits in the agreement.

Ask for the lot code on the box and the case so a complaint traces to one batch, and for the lot-code key with the first shipment. Three fields belong on your file whoever you buy from: the legal manufacturer, the EU authorised representative or responsible person, and the US agent of record. Ask each supplier to confirm all three for your destination market in writing.

When private label is the wrong call

Under roughly a container a year, your own box is a false economy: you pay plates, print minimums per size and the artwork cycle on a volume that cannot absorb them. Buy a neutral box and apply your own label until the volume justifies the plates — and if the only reason for private label is to hide where the gloves come from, the Article 16 route you would need is usually not worth it.

Start from the MXGUARD® nitrile exam gloves page, or the HM-1101 nitrile gloves 3.5 g item whose published specification is quoted above; the full nitrile gloves manufacturer range sits one level up. For the process behind each customisable step, see how nitrile gloves are made; for the specification language to put in your brief, powder-free nitrile exam glove specifications; and for what each document proves, glove certifications: FDA, CE and ISO 13485.

FAQ

If I put my own brand on the box, who is the legal manufacturer?

Under Article 16 of Regulation (EU) 2017/745 a distributor or importer making a device available under its own name, registered trade name or registered trade mark assumes the manufacturer’s obligations, unless there is an agreement under which the manufacturer is identified as such on the label — decide it at the brief, not at artwork, because it changes the box, the document pack and who holds the technical file; most glove programmes take the agreement route, settled in writing.

How is the minimum order quantity set for a private label run?

Our MOQ is flexible. Tell us the quantity you need and we will quote accordingly. On a branded order the floor is the print minimum on the box rather than the gloves, which is why a multi-market launch with several language versions is better served by one neutral box with applied labels until volume grows.

How is a custom glove colour matched, and how is the shade controlled?

As a compounding change with a trial run and shade approval against a physical reference; agree the reference, who retains the counter-sample, the tolerance and the lighting condition before the main run, because pigment lots drift and a shade signed off from a photograph gives neither side a basis for rejection.

What has to be printed on the box label for the EU market?

The symbols and information supplied with the device follow EN ISO 15223-1 and EN ISO 20417, and our EU Declaration of Conformity references those alongside EN 455-1 to -4; leave panel space for the UDI carrier, the lot and expiry panel, size, count, gram weight and the standards claimed, and where the glove is not made with natural rubber latex use that wording rather than “latex free”.

WhatsApp